Colecovision Expansion Module #2: Cable Replacement

I recently stumbled upon a pristine-looking, complete in-box Colecovision Expansion Module #2 (AKA the Steering Wheel). Showing no signs of the all-too-common leaky battery damage, I took the plunge, but when I tested the cable for continuity, only three of the five pins were connected.

I looked and couldn’t find a description or image anywhere for which pins went to positions 1-5 on the PCB. So, after carefully carving away the rubber around the pins at the plug, I determined which pins went where and replaced my cable. I now have a working Expansion Module. I have attached an image of the pin to PCB layout in case anyone else needs it in the future.

The replacement cable was purchased from AliExpress but one could also be harvested from a Sega Genesis controller
https://www.aliexpress.com/item/1005005729933584.html
https://www.aliexpress.com/item/1005006316338975.html